Ikkuna peilikalvo 50 cm x 10 m

Ikkuna peilikalvo 50 cm x 10 m

• Product : sun protective film
  Surface material : PET
  Surface thickness (μ) : 23
  Surface basic weight (g/m²) : about 32g
• Backing paper : PETR
  Backing paper basic weight (g/m²): about 32g
• Glue: acrylic
  Product: permanent
  Dry glue thickness (μ) : 8μ
• Transparency : 9020 – 5%
  Infra red reduction : 9020 – 98%
  UV reduction : 9020 – 95%

 

Ikkuna peilikalvo 50 cm x 10 m KIINNITYSOHJE: Mittaa tarkasti ikkunan koko ja leikkaa kalvosta vähän isompi kuin pinta-ala. Irrota suojakalvo peilikalvon takaa irti, helpoiten se käy teipin avulla: kiinnitä pala teippiä kalvon molemmille puolille ja vedä vastakkaisiin suuntiin. Kostuta puhdas ikkuna märäksi sumutinpullolla. Tasoita ikkunalastalla niin ettei ilma- tai vesikuplia jää näkyviin. Jos ei onnistunut, voit aloittaa alusta. Pysyy hyvin, mutta voidaan myös irrottaa. Ei sisällä liimaa. Staattinen kalvo.

INSTRUCCIONES INSTALACION:

Measure your window and
cut a piece of your Patifix
Sun Protective Film somewhat
larger as the window, which you
want to cover with the Íilm. Clean
the window carefully. Wet the
window carefully with a sponge
or a floweÍ-spray.

Take of the protective part of the
film. This will go easily, if you
stick a piece oÍ adhesivetape on
the corner of both sides of the
film. With the two parts of the
tape you can easily take ofÍ the
film from each other.
Measure your window and
cut a piece of your Patifix
Sun Protective Film somewhat
larger (2 mm) as the window, which you
want to cover with the film. Clean
the window careÍully. Wet the
window carefully with a sponge
or a flowef-spray.

Warning: do not use adhesive with the sun protection film! The film adheres statically without adhesive!

Note: ensure a careful working of the edges. The edges and corners of the sun protection film should not have any contact with the rubber seal or window frame

Mitat	50 × 5 × 5 cm (senttimetri)